CLEAR & MATTE
* Original Grout Colour Guaranteed
* Matt Finish
* Extremely Stain Resistant
* One Coat Application
Description
Invisible Grout Seal is specifically formulated to maintain a grouts original matt colour whilst creating a stain resistant and water proof finish. Invisible Grout Seal is recommended for all grout joint installations.
| Suitable Grouts | Suitable Substrates | Colour |
| All | All | Clear |
| | | Interior | Exterior |
| | | Walls | Walls |
| | | Floors | Floors |
PRECAUTIONS
Invisible Grout Seal is unsuitable for: - sealing moisture sensitive green marble joints.
- Wet grout; areas to be treated must be thoroughly dry.
SPECIAL CARE REQUIRED
Test a small area prior to sealing the whole tile joint installation. Residues must be rinsed off tiles & metal fittings with water. Spills on fabrics must be rinsed off immediately with water to avoid staining and permanent damage.
TILE JOINT PREPARATION & WATER CONTENT
Tile joints must be thoroughly cleaned of all dust and any other contaminants. Use Invisible Grout Seal on dry grout joints only.
New Grout Installations: Seal seven days after damp curing.
Old Grout Installations: Seal 24 hours after cleaning.
APPLICATION & TOOLS
Invisible Grout Seal should be applied undiluted using a brush. Working within small areas at a time, completely wet the joint with Invisible Grout Seal. Avoid using excess sealer and immediately wipe up any residues with a clean & damp cloth.
COVERAGE
Coverage is approximate only and will vary according to the porosity of the grout and the dimensions of the tile joint. As a guide, 1 litre of Invisible Grout Seal will cover approximately 50 square metres of regular grout joints with a width of 4mm.
CURE TIME
Invisible Grout Seal cures in approximately 24 hours at 23°C and 50% relative humidity. Temperatures during sealing below 10°C will significantly increase the cure time.
CLEAN UP
Wet Invisible Grout Seal can be cleaned off any surface or material with water.
EXPECTED WEAR
Invisible Grout Seal has an approximate wear life of 3 to 5 years on exterior installations and at least 5 years on interior installations. Invisible Grout Seal may be adversely affected by repeated exposure to concentrated acid or alkali based cleaners.
SHELF LIFE
Twelve months if stored in the original factory sealed packaging.
PACKAGING
Invisible Grout Seal is available 1L ontainers.
SPECIFICATION CLAUSE
The wall & floor grout sealer shall be Morgan Invisible Grout Seal - a high performance grout sealer.
